JENEsys® Edge™ Controllers
Online Demo | Support | 877.649.5969 USA

 

JENEsys® Edge™ Controllers

JENEsys® Edge™ products are a new generation of controllers combining the Niagara Framework® with Lynxspring's Onyxx® platform. 

Designed to provide maximum performance at minimum cost, JENEsys® Edge™ Controllers bring edge connectivity, data access, powerful processing and control to today's small to mid-sized facilities, plant control, and machine-to-machine and IoT applications. They will enable facility managers and operators to use a known UI, ProBuilder or Workbench, to achieve operational efficiencies between multiple systems/devices supporting facility management functions, equipment control and business applications.

Compatible with Niagara, JENEsys® Edge™ Controllers use the Fox Protocol to facilitate communications between Niagara stations.

 

Sub Categories

JENEsys® Edge™ 534 IoT Controller

The JENEsys® Edge™ 534 IoT Controller is a fully programmable Niagara Controller with 34 IOs built-in and expandable up to 306 IOs, delivering edge connectivity, interoperability, data access and analytics for today's buildings, energy management, machine-to-machine applications and IoT environments. Taking Niagara to the edge with real-time control, the JENEsys® Edge™ 534 IoT Controller utilizes the same familiar ProBuilder workbench software, Niagara programming tools and Fox Protocol.

Watch the Wiring "How-To" Videos.

Download the Onyxx® Driver

 

 

JENEsys® Edge™ 100 Controller

The JENEsys® Edge™ 100 combines a controller, gateway and web server duties all into a single device - taking Niagara to the edge with real-time control.

Designed to provide maximum performance at minimum cost, the JENEsys® Edge™ 100 brings edge connectivity, data access, powerful processing and control to today's small to mid-sized facilities, plant control, and machine-to-machine and IoT applications.

The JENEsys® Edge™ 100 connects, integrates and correlates facility equipment, systems and IoT devices. It enables facility managers and operators to use a known UI (ProBuilder/ Workbench) to achieve operational efficiencies between multiple systems/devices supporting facility management functions, equipment control and business applications.

Compatible with Niagara, the JENEsys® Edge™ 100 uses Fox Protocol to facilitate communications between Niagara stations.

The JENEsys® Edge™ 100 connects, controls and manages devices and equipment by utilizing the advanced capabilities of open source hardware together in a secured environment from device-to-Cloud, device-to-device and to the edge.

JENEsys® Edge™ 100 Features

  • Niagara Station with 2 options:
    • a maximum of 250 points, 5 device limit
    • a maximum of 250 points, no device limit
  • Programmable with Niagara and Fox Protocol
  • Supports JAVA Web Start for access without JAVA plug-ins
  • Standard Drivers - Niagara Network (Fox), BACnet, Modbus, Web & oBIX
  • Compatible with many additional drivers
  • 800 MHz, 4 GB on-board Flash memory
  • 1 GHz AM335x ARM Cortex A-8 Processor
  • Runs on Onyxx® - an extensible platform
  • Application-specific apps can be added
  • Unit footprint smaller than a JACE®
  • 35 mm DIN rail or flat panel mounting

 

JENEsys® Edge™ 100 Controller with Universal Input Option

The JENEsys® Edge™ 100 with Universal Input Option provides two additional inputs and is available for both the JENE-EG100-SSA (250 points, 5 device limit) and the JENE-EG100-SSA-ULD (250 points, no device limit).

This controller is ideal when you need to pick up that extra input or add an additional point and is perfect for voltage, pressure, temperature, humidity, CO2, occupancy sensors and photocell applications.

 

The JENEsys® Edge™ 100 supports the following:

  • Type-3 10K ohm Thermistor
  • Resistive 0-100K ohms
  • 0-10 Vdc
  • 4-20 mA